1L Laboratory vacuum emulsion reactor
Place of Origin: Wuxi,Jiangshu,China
Material: SUS304 / SUS316
Packing: Wooden Case / Stretch Wrap
Delivery time: 20-30 days
Model: 1L
Product Introduce
Laboratory vacuum emulsification reactor: realize the process of material dispersion, emulsification, homogenization and mixing under vacuum or pressure environment. It can be equipped with a variety of high-viscosity stirrers, high-shear homogenizers, and reliable vacuum sealing systems and temperature control systems. Various sensing and detection systems can simulate industrial production in a laboratory environment.
At present, the laboratory processing capacity is: 1L, 2L,5L 10L and other series. The lab vacuum emulsifying mixer, it is is used for dispersion, mixing, emulsification, homogenization, stirring and dissolving in the laboratory. The whole reaction process of stirring, homogenizing, emulsifying, dispersing, mixing, etc. of the material can be observed through stainless steel kettle under vacuum or pressure conditions, and it can also be homogeneously emulsified and dispersed by stainless steel pressure and high temperature.
Video Display
Product Parameters
|
Model |
MAX-1L |
MAX-5L |
|
Power Supply |
220V 50/60HZ |
220V 50/60HZ |
|
Max mixing capacity |
100-1000ml |
1000-5000ml |
|
Max emulsification capacity |
400-1000ml |
2500-5000ml |
|
Working Temperature |
170℃ |
170℃ |
|
Up to vacuum mpa |
-0.0975---0mpa |
-0.0975---0mpa |
|
Processing Viscosity |
100000mpas |
100000mpas |
|
Mixing Speed Range |
0-230rpm |
0-230rpm |
|
Mixing motor power |
90W |
180W |
|
Homogenizer speed |
8000-28000rpm |
8000-28000rpm |
|
Propeller |
Anchor type screw belt wall scraping mixing paddle |
Anchor type screw belt wall scraping mixing paddle |
|
Scraper Material |
Silicone Rubber |
Silicone Rubber |
|
Reactor lid opening |
Homogenizer port + hopper port + temperature measuring port + vacuum port + 3 spare ports |
Homogenizer port + hopper port + temperature measuring port + vacuum port + 3 spare ports |
|
Main materials in contact with materials |
SS316L、FKM10 |
SS316L、FKM10 |
|
Outer diameter of vacuum port |
12mm |
12mm |
|
Outside diameter of glass kettle jacket inlet and outlet |
20mm |
20mm |
|
Exterior Dimension |
490mm*600mm*1250mm |
490mm*600mm*1250mm |
|
Standard weight(kg) |
42 |
45 |
Working Principle
Put the materials into premix tank oil phase tank and water phase tank,after heated & mixed in water tank and oil tank, it can drawn the materials into emulsifying tank by vacuum pump. Adopting the middle stirrer & Teflon scrapers residues in emulsifying tank that sweep the residues on the wall of the tank to makes the materials wiped off become the new interface constantly.
Then the materials will cut off, compressed and fold by the blades to stir, mix and run to the homogenizer. By the strong cutting off, impact and turbulent current from the high-speed shear wheel and fixed cutting case, the materials are cut off in interstices of stator and rotor and turn to particles of 6nm-2um promptly. Because the emulsifying tank is working under the vacuum state, the bubbles that produces in the process of mixing is taken away in time.
Product Features
Emulsifying machine structure diagram
Product Description
Application
