Mayar da ci gaba, masana'antu da tallace-tallace, azaman masana'anta na farko na Emulsifier na farko.
Na'urar watsawa mai ƙarfi ta 400L mai siffar Gantry mai siffar Shaft guda uku don manne na silicone da manne na gilashi | Injin haɗa masana'antu don Kasuwar Amurka
Neman na'urar watsawa mai ƙarfi wacce za ta iya sarrafa manne-manne na silicone, manne-manne na gilashi, da manne-manne
2026-05-29
Kuna neman na'urar watsawa mai ƙarfi wacce za ta iya sarrafa manne-manne na silicone, manne-manne na gilashi, da manne-manne yadda ya kamata?
An ƙera na'urar watsawa mai ƙarfi ta 400L Gantry-Type Three-Shaft Powerful Disperser don haɗa abubuwa masu nauyi, yana ba da kyakkyawan yankewa, daidaito, da kuma daidaitawa ga masana'antun Amurka. Ko kuna samar da manne na silicone na RTV, manne na gilashi, ko manne na masana'antu, wannan na'urar tana ba da inganci mai daidaito - bayan rukuni.（ Ruwan silicone manne ne mai sassauƙa, mai hana ruwa shiga wanda aka ƙera don rufe gidajen haɗin gwiwa, gibba, da tsagewa a cikin gine-gine da ayyukan DIY ）
Me Yasa Zabi Mai Rarraba Shaft Uku Mai 400L?
Ruwan silicone da manne na gilashi suna da ɗanɗano mai yawa, ba ruwan Newton ba ne wanda ke buƙatar haɗawa mai ƙarfi, warwatsewa, da kuma rage zafi. Masu haɗa shaft guda ɗaya na gargajiya ba sa karya ganglomerates ko cimma daidaito.
Tsarin shaft uku ya haɗu:
Na'urar scraper mai ƙarancin gudu - don kwararar ruwa mai yawa da goge bango
Masu rarrabawa guda biyu masu sauri - don watsawa mai ƙarfi na abubuwan cikawa (silica, calcium carbonate)
Wannan haɗin yana sarrafa ɗanɗano har zuwa 1,000,000 cP, wanda hakan ya sa ya dace da tsarin silicone.
Mahimman Sifofi na 400L Gantry-Type Disperser
1. Tsarin Ɗagawa Nau'in Gantry
Lifta mai amfani da ruwa ko lantarki don sauƙin tsaftacewa da kulawa.
Yana ba da damar sauya tasoshin ruwa cikin sauri da kuma samun damar shiga tankin hadawa gaba daya.
2. Tsarin Tashin Hankali Mai Shafi Uku
Aikin Gudun Nau'in Shaft
Mai watsawa Mai Sauri na Tsakiya 0–1440 rpm (VFD) Watsawa ta foda, rage girman barbashi
Mai watsawa Mai Sauri Mai Girma na Gefe 0–1440 rpm (VFD) Ingantaccen yanke don cikakken daidaiton tanki
Mai Rage Sauri na Anga 0–60 rpm Goge bango, haɗa abubuwa da yawa, canja wurin zafi
3. Ƙarfin Aiki na Lita 400
Ya dace da sikelin samarwa daga gwaji zuwa ƙaramin girma (galan 100-150 a kowane tsari).
Ya dace da:
Sinadaran silicone (mai hana acid/tsaka-tsaki)
Manna gilashi (gilashin tsari)
Manne da mannewa
4. Zaɓuɓɓukan Injin Tsaftacewa da Dumamawa
Injin cire iska - yana cire kumfa daga mannewar silicone
Tankin da aka saka jaket - don dumama/sanyaya (ruwa ko zagayawa mai)
5. Gine-gine Masu Nauyi
Sassan hulɗa: 304 ko 316L bakin ƙarfe
An goge shi zuwa RA ≤ 0.8 µm don sauƙin tsaftacewa da juriya ga tsatsa
Hatimin injina mai jure lalacewa don aikin injin
Aikace-aikace a Masana'antar Sealant & Manna
✅ Masu rufe silicone na RTV (acetoxy, oxime, alkoxy)
✅ MS Polymers (wanda aka gyara silane)
✅ Ruwan rufe fuska na polyurethane
✅ Manna Gilashi don bangon labule
✅ Man shafawa da manna na masana'antu
Bayanan Fasaha (Model 400L)
Darajar Sigogi
Jimlar Girma ~500L
Ƙarfin Aiki 400L (galan 100–120)
Babban Ƙarfin Mota 22–37 kW (VFD)
Babban Ramin Shaft RPM 0–1440 (wanda za'a iya daidaitawa)
Anchor Scraper RPM 0–60
Matakan injin tsotsa -0.098 MPa (zaɓi ne)
Hanyar Dumama Jaket na lantarki / mai / tururi
Hanyar Fitar da kaya Karkatar da bawul ko ƙasa
Tsarin Kulawa PLC + allon taɓawa (da hannu/atomatik)
Fa'idodi ga Masana'antun Amurka
Saurin lokacin tattarawa - sanduna uku suna rage zagayowar haɗuwa da kashi 40-50%
Babban nauyin cikawa - kyakkyawan watsawa na silica mai cike da sinadarai da kuma sinadarin calcium carbonate
Ingancin maimaitawa - Kula da VFD yana tabbatar da rheology iri ɗaya kowane tsari
CIP mai sauƙi - ɗagawa mai ƙarfi yana ba da damar shiga cikakken tanki ba tare da buɗe bolting ba
Ya dace da GMP - ƙarewar bakin ƙarfe ya dace da masana'antar rufewa
Jigilar kaya zuwa Amurka: Abin da Ya Kamata Ku Sani
Muna fitar da na'urorin rarrabawa masu nauyin lita 400 zuwa manyan tashoshin jiragen ruwa na Amurka:
Los Angeles / Long Beach (CA)
Houston (TX)
Savannah (GA)
Newark (NJ)
Lokacin bayarwa: kwanaki 45-60 bayan bayarwa
Marufi: Fitar da akwatunan katako (wanda ISPM-15 ta ba da takardar shaida) ko kuma lodawa kai tsaye a cikin akwati
Ma'aunin wutar lantarki: 460V / 60Hz / Mataki na 3 (ko 230V - akwai na musamman)
Takaddun shaida na UL / CE - yana samuwa akan buƙata
Ƙarin Zaɓuɓɓuka ga Abokan Ciniki na Amurka
Rijistar bayanai ta atomatik (rahoton rukuni, zafin jiki, karfin juyi, gudu)
Tsaron tsaro tare da makullin kullewa (salon OSHA)
Tsarin feshi na CIP na wayar hannu
Tashar allurar pigment a layi
Labarin Nasarar Abokin Ciniki (Amurka)
*"Mun sauya daga injin haɗa duniya zuwa wannan na'urar watsa shaft uku mai 400L don na'urorin rufe gilashin silicone ɗinmu. Lokacin aiki ya ragu daga awanni 4 zuwa awanni 2.2, kuma na'urar cire iska ta cire ramuka a cikin fitar da iskar gas ɗinmu. Ɗaukar iska mai ƙarfi yana canza yanayin tsaftacewa."
— Manajan Samarwa, Mai Kera Sealant na Tsakiyar Yamma
Nemi Farashi - Na'urar Rarraba Nau'in Gantry 400L don Manne na Silicone & Gilashi
Shin kuna shirye don haɓaka layin samarwa? Tuntuɓe mu a yau tare da ku:
Nisa tsakanin danko
Fitowar da aka yi niyya a kowane motsi
Nau'in kayan aiki (silikone, MS, PU, da sauransu)
Muna bayar da:
Shawarwari kan tsari kyauta
Bidiyon masana'anta ko gwajin a wurin aiki
Kayayyakin gyara da tallafin fasaha na nesa ga abokan cinikin Amurka
✅ Imel:maxwell4@mautotech.com
✅ WhatsApp/WeChat :+8613665172481
Tambayoyin da Ake Yawan Yi (FAQ)
T: Shin wannan injin zai iya haɗa mashin silicone tare da cikawa har zuwa kashi 60%?
A: Eh. Tsarin shaft uku tare da sarrafa VFD yana ɗaukar nauyin cikawa mai yawa (misali, 50-70% calcium carbonate + silica).
T: Kuna bayar da tallafin shigarwa a Amurka?
A: Muna ba da cikakkun bayanai, jagorar bidiyo, da kuma zaɓin aikin da ma'aikacinmu zai yi a wurin (kuɗin tafiya + kuɗin yau da kullun).
T: Menene mafi ƙarancin adadin oda (MOQ)?
A: Naúra ɗaya. Mu masana'anta ne kai tsaye, ba kamfanin ciniki ba.
an ba da shawarar a gare ku
Tuntube mu
Tuntube mu yanzu
Maxwell ya aikata fa'idodin masana'antu a duk faɗin duniya, idan kuna buƙatar injin haɗin, masu don injunansu, ko mafita don layin samarwa, don Allah ku ji kyauta don tuntuɓar mu.
USEFUL LINKS
CONTACT US
Lambar waya: +86-159 6180 7542
WhatsApp: +86-136 6517 2481
Wechat: +86-136 6517 2481
Imel:sales@mautotech.com
Ƙara:
No.300-2, Block 4, Technology Park, Changjiang Road 34#, Sabuwar Gundumar, Wuxi City, Lardin Jiangsu, China.
Copyright © 2026 Wuxi Maxwell Automation CO., Ltd --www.MAXwelllixing.com |
Sat