30L Bottom Homogenizer Vacuum Emulsifying Mixer
Material : SUS304 / SUS316
Complete 3-in-1 System : Main pot + oil pot + water pot
Slow-Speed Scraper Mixer: PTFE scraper blades
Scraper Stirring Speed: 10-120 RPM
High-Shear Homogenizer: Rotor-stator design
Homogenizing Speed: 3000 RPM
Design Volume: 35L
Working Capacity: 30L
Product Introduce
Why choose a bottom homogenizer ?
With a bottom-mounted design, the homogenizing head is positioned at the lowest point of the vessel. Under the influence of gravity, the material flows naturally into the shear zone. For high-viscosity, highly thixotropic pastes, this design is more effective at achieving fine particle sizes than top-mounted homogenizers (typically achieving D90 ≤ 5 microns, or even nanoscale particles).
The cover of the pot is of automatic lifting type, the materials in the water and oil pots can directly enter the emulsifying pot under vacuum through the conveying pipeline, the discharging mode is the emulsifying pot turning type and the bottom valve discharging type, etc.
Video Display
Product Parameter
|
Scraping stirring speed |
10-120 rpm Adjustable |
|
Homogenizing rotation speed (r/min) |
3000 (r/min) |
|
Heating Method (optional) |
Steam Heating or Electric Heating |
|
Cooling Method (optional) |
Water Cooling or Mold Temperature Controller |
Working Principle
Put the materials into premix tank oil phase tank and water phase tank,after heated & mixed in water tank and oil tank, it can drawn the materials into emulsifying tank by vacuum pump. Adopting the middle stirrer & Teflon scrapers residues in emulsifying tank that sweep the residues on the wall of the tank to makes the materials wiped off become the new interface constantly.
Then the materials will cut off, compressed and fold by the blades to stir, mix and run to the homogenizer. By the strong cutting off, impact and turbulent current from the high-speed shear wheel and fixed cutting case, the materials are cut off in interstices of stator and rotor and turn to particles of 6nm-2um promptly. Because the emulsifying tank is working under the vacuum state, the bubbles that produces in the process of mixing is taken away in time.
Product Features
Emulsifying machine structure diagram
Application
